← All case studiesLED lightbar / Case study

Shape the beam.
Manage the heat.

A synthetic lightbar study explores how optical architecture, heat paths, drive current, and manufacturing variation interact.

Engineering visualization from Paraxial simulation results
What the study reveals

The results.
The design implications.

01

Explore the design space.

The study screened 174 candidates across three optical families for a 33 mm bar. A reflector-and-lens architecture was evaluated against synthetic angular requirements across five weather cases.

02

Find the hidden constraint.

The initial design left little thermal margin: its modeled lens temperature was 84.0°C against an 85°C limit. Most lens heat entered through the LED-board mount, while the assumed-tolerance check exposed blue-channel headroom limits.

03

Redesign the operating point.

Reducing assumed mount conductance and adjusting drive currents produced a modeled 83.4°C lens temperature at 62 W average. The same 100 traced tolerance cases cleared the revised intensity targets.

The engineering takeaway

Optical performance is part of a larger engineering decision.

The study demonstrates how ray tracing, thermal analysis, and design iteration can work together. Results apply to the stated geometry, heat-transfer assumptions, and synthetic targets. This is not a certification result or a production-yield guarantee.

Your next design starts here

Bring us your
optical challenge.

Tell us what you’re designing and where the current workflow slows you down.

Discuss your design

Paraxial in action

Recorded Paraxial workflow. The interface and capabilities continue to evolve.

Engineering image