← All case studiesHeated camera / Case study

When the camera heats up,
the whole design matters.

Watch a thermal change alter the optical path, blur the image, and motivate a redesigned system using real Paraxial simulation results.

Open related case study PDF

Agricultural-camera co-design, a separate case study from the film.

Engineering visualization from Paraxial simulation results
What the study reveals

The results.
The design implications.

01

Start with image quality.

Follow the nominal optical path and sensor image. The demonstration connects a physical model to the image-quality consequence an engineer actually cares about.

02

Change the environment.

At 60°C, the modeled thermal change spreads the light and degrades the image. The film tests limited focus travel of ±0.04 mm; it does not claim refocusing is ineffective in every camera.

03

Return to the design.

The redesign changes the system response and restores image sharpness within the demonstration. Deformation is exaggerated visually so that the underlying mechanism is easier to see.

The engineering takeaway

A related study takes the co-design question further.

The downloadable agricultural-camera case study explores lens, mount, and cooling choices with a fixed sensor. It is a separate study from the film. Both its sequential and joint searches meet the specified requirements; their final worst-case sharpness is effectively tied.

Your next design starts here

Bring us your
optical challenge.

Tell us what you’re designing and where the current workflow slows you down.

Discuss your design

Paraxial in action

Recorded Paraxial workflow. The interface and capabilities continue to evolve.

Engineering image